0086 577 58126355   jason@focusonpack.com
Complete Filling and Packaging Solution
You are here: Home » Semi Automatic Shrink Wrapping Machine
Semi Automatic Shrink Wrapping Machine
Semi automatic/manual bottle shrink wrapping machine is designed for small operations and startup companies, low cost, easy to use and widely used to wrap a wide variety of packs either as individual packs(e.g.,carton) or as collations(e.g.,bottles,cans,jars,boxes,etc.) into their respective formats (either 4 bottles x 6 bottles(1/2 liter) or in other packaging configurations such as the 3 x 4, 1-liter arrangement to be wrapped unsupported, pad-supported or tray-supported. Each shrink wrapping system comes with bundler, shrink tunnel and discharge conveyor.
With a semi automatic/manual shrink wrapping machine for bottles, The products are positioned in the front of the pneumatic infeed pusher by hand, a button is pressed which starts the wrapping cycle, the collated product is then pushed to sealing and cutting station by air cylinder. Shrink wrapper machine commonly use two reels of film which are joined to form a web, one reel is mounted at high level and the other is mounted at a low level. The product to be wrapped is passed through the web. The sealing bar descends to seal and cut the film to form an envelope around the package leaving two open ends at the sides.
After sealing, the next product to be wrapped then pushes the wrapped product into the heat shrink tunnel where recirculated hot air causes the wrapped products to shrink and tightly confirm to the contours of the contents. Once the pack is out of the chamber, forced air cooling is used to tighten the sleeve wrap to achieve a strong, secure pack ready for stacking on a pallet or placing in a shipping carton.
Sleeve Wrapper Features
 Heavy duty frame construction made on painted steel tube
 Wheels and height adjustable legs for transport and positioning
 Flexibility to wrap trayed and trayless packs
 Accepts a package size of 500mm(W) X 350mm(H)
 Adjustable pusher assembly with two hand start switches
 Adjustable product hold down device to press containers of different height
 Adjustable product clamp and dead plate for containers of different diameter
 Convenient controls for easy set up
 600mm flat maximum shrink film width
 Unique heavy duty specially profiled sealing jaw for consistently strong seals
 Teflon coated sealing blade
 Top and bottom powered film unwind
 Easy to use and maintain
Shrink Tunnel Features
 Heavy duty welded steel frame with adjustable height
 Wheels and height adjustable legs for transport and positioning
 Insulated shrink tunnel chamber
 Stainless steel heating elements for long life
 Shrink tunnel opening is 550cm(W) X 400mm(H)
 Adjustable conveyor speed
 Adjustable temperature control
 Dual blower design with adjustable air flow
 Durable and non-stick teflon mesh conveyor belt
 Tunnel discharge cooling station for fast film curing
 Discharging idle roller conveyor for accumulation and easy transportation
Technical Specifications
Packing Speed 5-8Packs/Min
Max Pack Size 500(W)x350(H)mm
Applicable Film Polyethylene(PE) Film
Max Film Thickness 100Micro
Shrink Wrapper
Max Film Width 600mm
Sleeve Wrapper Electric Supply 220V 50/60HZ 1PH 1.50KW
Top Film Feeding Motor 220V 50/60HZ 1PH 25W
Bottom Film Feeding Motor 220V 50/60HZ 1PH 25W
Sleeve Wrapper Dimension 1040x930x1930mm
Sleeve Wrapper Weight 200kgs
Shrink Tunnel
Shrink Tunnel Opening 550mm(W)x400mm(H)
Shrink Tunnel Heater 380V 50/60HZ 3PH 18.40KW
Conveyor Motor 220V 50/60HZ 1PH 90W
Reciriculation Blower 220V 50/60HZ 1PH 120W(60Wx2)
Shrink Tunnel Chamber 1500x550x400mm
Shrink Tunnel Dimension 2500x800x1480mm
Shrink Tunnel Weight 360kgs
Idle Roller Conveyor
Dimension 1200x550x720mm
Idle Roller Weight 60kgs
  Specifications are subject to change without notice, All rights are reserved.

COMPANY

CONTACT

BOWEI 
GECHAO RD
AOJIANG TOWN
PINGYANG COUNTY
WENZHOU CITCY
ZHEJIANG PROVINCE
CHINA 325401

Copyright © Wenzhou Bowei Import & Export Co.,Ltd      SiteMap      XML